The additional detector can be added to the WD-1 by using the TSS-1 / T-splitter and water detector (sensor) set. It comes with a T-splitter and an additional water detector in order to have multiple points to detect water by using a single WD-1 module....
The TSS-2 extension cable is simply a 16 ft extension cable to use with the WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or distance between the WD-1 module and the sensor). PACKAGE INCLUDES...
The ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main controller. PACKAGE INCLUDE 1 x 16ft Extension Cable Specifications...
The TrolMaster Carbon-X system provides critical monitoring of CO2 levels for up to 13 separate zones/rooms. The system can have both high level (up to 30,000ppm) alerts, as well as low level (5,000ppm) alerts. Both high and low-level limits are user-adjustable to meet local regulations...
The ability to read up to 30,000 ppm CO2 is critical to the proper operation and safety of an emergency CO2 system like the Carbon-X. The MBS-K30 is Trolmaster’s newest CO2 sensor, which incorporates an NDIR 0-30,000 ppm sensor in a self-aspirated enclosure. The MBS-K30 also...
The AS-1 CO2 Alarm Station is an audio/visual alarm to be mounted inside or outside the room to be monitored, and sound an alarm (both visible and audible) in the event of the CO2 level going above normal or safe levels. It can be linked...
The AS-2 CO2 Alarm Station combines an audio-visual alarm module with a color-coded LED display indicator and an LCD digital ppm level reading. It is designed to be mounted outside of the space to be monitored and will display the CO2 ppm-level. The DSA-1 can...
The DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 120V controlled outlet that supplies the power to CO2 solenoid valves in normal operation. The Carbon-X will...
The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to those who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order...
TrolMaster modules and sensors all come complete with an RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft...
If your facility does not have ANY internet service, and you want to connect the Hydro-x, Aqua-x, or Hawkeye units, the RTU-1 might be the solution for you. The RTU-1 uses a cellular (AT&T) sim card and the cellular network to provide an internet connection...
The Beta-1 is a simple solution for the Mini Split Air Conditioners. It uses the remote control that came with your mini-split air-conditioner to “learn” how to change the setpoints on the mini-split. Just about any brand of the mini-split unit can be controlled...
The BETA-2 can control variable-speed fans by using the current temperature to increase or decrease the fan speed. By increasing the fan speed, cooling is increased… decreasing fan speed will reduce cooling capacity. Using the BETA-2 in this way provides a VERY economical and efficient...
The BETA-6 features a precision humidity sensor within a 16ft remote probe assembly. Simply plug in your humidity / dehumidify device to the power outlet on the bottom of the BETA-6. The user can select separate “day/night” humidity settings and the photocell built into the...
The BETA-8 CO2 controller offers a precision CO2 NDIR sensor/controller in an affordable easy-to-use package. The BETA-8 features a high-quality remote CO2 sensor (with 16ft cable) and built-in photocell to automatically activate your supplemental CO2 system to maintain CO2 PPM levels only during daylight hours....
TrolMaster revolutionized environmental controller technology when it introduced the Hydro-X. The Hydro-X Pro continues the revolution with a 10’ touch-screen and web-based software. The Hydro-X Pro is backwards compatible with all current Hydro-X control / device modules. It also provides greater flexibility and allows...
The ECS-5 provides a 5/8” diameter connector for some of Fluence brand's newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter, and a special 4 ft RJ12 / PushLock Waterproof...
The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter, and a special 4 ft RJ12 / Threaded Waterproof Connector...
The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter, and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture...
The BM-1 weatherproof box is designed for the protection of TrolMaster TS-1/2, HS-1, and ARS-1 controllers from dripping water and low-pressure sprayed water.
PACKAGE INCLUDE
1x BM-1
The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turning on exhaust fans. There are...
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an EC-motor...
The HLG 650R Commercial Indoor Horticulture LED grow light is designed to replace a double-ended 1000 watt HID lamp. Each HLG 650R uses 4 of our custom-designed, full-spectrum, high-efficiency, white light, quantum boards with Samsung LM301H and Deep Red LED 660nm diodes. This unit...
320 Pints Per Day, 208-240VAC. Anden A320V1Dehumidifier is designed and built for growth, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth...
HLG Scorpion Diablo is designed for grows with low ceiling heights or for vertical racks. HLG Scorpion Diablo uses 6x QB648 Diablo Quantum Boards® for an even light spread at just 12" from the canopy. This is a very efficient full spectrum horticulture lamp with...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
Our HLG 300L V2 Rspec Commercial Indoor Horticulture LED grow light is designed to replace a single-ended 600watt HID. Each HLG-300L V2 uses 2 of our custom designed full-spectrum high-efficiency white light quantum boards with 544 Top-Bin Samsung LM301B (3500K) and 32 Top-Bin Osram 660nm...
The Electric Sky 300 V3 (ES300 V3) is a flagship, high-power grow light. For only 330 watts, it is blazingly intense. It’ll bring a smile to the face of any home or commercial grower as it beams huge amounts of wideband light energy to plants...
The HLG 650R Commercial Indoor Horticulture LED grow light is designed to replace a double-ended 1000 watt HID lamp. Each HLG 650R uses 4 of our custom-designed, full-spectrum, high-efficiency, white light, quantum boards with Samsung LM301H and Deep Red LED 660nm diodes. This unit...
SolarBar SB800 (Bar8). The most stunningly powerful and flexible SolarSPEC™ horticulture lighting solution to date. The Bar8 is designed specifically for single and multi-tier commercial cultivation with a recommended mounting height over canopy of 6-60″(6-18″ w/no lenses, 24-60″ w/ optional secondary lenses). Precision and innovation have...
The GSI1, Grow Strong’s digital lighting controller, connects with over 500 X2 grow lights across two zones using standard telephone cables. This compact unit can control lights as far as 1,000 feet away with no start-up surge. and simulate sunrise and sunset, gradually warming up...
Welcome to the future of commercial LED grow lights Developed as the perfect solution to vertical racking and overhead grow operations, the X² commercial fully-adjustable spectrum LED grow light from Kind LED was specifically designed for close-proximity growing, capitalizing on valuable tiered growing space while...
610 Watt Full Spectrum LED Grow Light made in the USA. Replaces 1000W Double-Ended Bulbs, and designed specially to be used in greenhouses as well as grow rooms. Nationwide compliant When used as supplemental greenhouse lighting the SK602 LED Grow Light coverage area in flower...
At 1050 actual watts and 1602 μMol/s total photon flux, the patent-pending PhytoMAX-2 1000 LED grow lights are the most powerful LED grow lights for sale worldwide. With PhytoMAX-2 we have delivered the most powerful and reliable, truly full-spectrum (365-750nm, UV to NIR) LED plant...
