The Beta-1 is a simple solution for the Mini Split Air Conditioners. It uses the remote control that came with your mini-split air-conditioner to “learn” how to change the setpoints on the mini-split. Just about any brand of the mini-split unit can be controlled...
The BETA-2 can control variable-speed fans by using the current temperature to increase or decrease the fan speed. By increasing the fan speed, cooling is increased… decreasing fan speed will reduce cooling capacity. Using the BETA-2 in this way provides a VERY economical and efficient...
The BETA-6 features a precision humidity sensor within a 16ft remote probe assembly. Simply plug in your humidity / dehumidify device to the power outlet on the bottom of the BETA-6. The user can select separate “day/night” humidity settings and the photocell built into the...
The ECS-5 provides a 5/8” diameter connector for some of Fluence brand's newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter, and a special 4 ft RJ12 / PushLock Waterproof...
The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter, and a special 4 ft RJ12 / Threaded Waterproof Connector...
The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter, and a special 4 ft RJ12 / 3.5mm jack cable. The special cable connects to your lighting fixture...
The BM-1 weatherproof box is designed for the protection of TrolMaster TS-1/2, HS-1, and ARS-1 controllers from dripping water and low-pressure sprayed water.
PACKAGE INCLUDE
1x BM-1
The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turning on exhaust fans. There are...
Anden dehumidifiers are designed for maximum growth. The 5781 Multi-Pleat 11 is produced with a highly specialized, dual-layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5781 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical...
Anden dehumidifiers are designed for maximum growth. The 5770 Multi-Pleat 11 is produced with a highly specialized, dual-layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5770 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical...
Anden dehumidifiers are designed for maximum growth. The 5771 Multi-Pleat 11 is produced with a highly specialized, dual-layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5771 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical...
Anden dehumidifiers are designed for maximum growth. The 5769 Multi-Pleat 11 is produced with a highly specialized, dual-layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5769 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical...
Anden dehumidifiers are designed for maximum growth. The 5772 Multi-Pleat 11 is produced with a highly specialized, dual-layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5772 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical...
The Model A76 Digital Dehumidifier Control communicates with your Anden dehumidifier, allowing you to control the operation of the unit from a distance. Using an onboard sensor, the Model A76 Dehumidifier Control monitors the relative humidity in the space in which it is located and...
The steam canister AS80 is the beating heart of your Anden humidifier, responsible for generating steam. Current runs between two electrodes within the canister, heating your water to a boil and creating steam that is distributed through the humidifiers fan pack. Made in Madison, Wisconsin,...
The Anden 4856 Dehumidifier Pump Accessory Kit provides a simple solution to empty excess water from the unit. The Dehumidifier Pump Kit will provide a quick burst of pumping action when the water reaches a certain point in the pump's well area. The Pump Kit...
The model 5660 hanging kits are designed for use with Anden Industrial Dehumidifiers A70 and A95 with a total safe working load of up to 400 pounds. The rugged suspension bars are created from 14 gauge zinc-plated steel. INCLUDED IN KIT: 10-foot cables with cripple...
The model 5691 hanging kits are designed for use with Anden Industrial Dehumidifiers A130 with a total safe working load of up to 400 pounds. The rugged suspension bars are created from 14 gauge zinc-plated steel. INCLUDED IN KIT: 10-foot cables with cripple clamps and...
The Anden Model 8082 Temperature/Relative Humidity Module is used to report temperature and relative humidity values back to the dehumidifier’s precision digital control module. It is compatible with Anden dehumidifier models A70, A90, A130, A200V1, A300V1, and A300V3. Each sensor module supports one temperature...
Anden Steam Humidifiers are a grow room solution that helps you achieve ideal conditions through humidity control. As water in the canister boils and turns into steam, minerals are left behind. Minerals remaining in solution increase the conductivity of the water. Minerals also deposit onto...
Monitor and adjust the relative humidity of your indoor growth environment with the Anden A77 Digital Dehumidifier Control. This wall-mounted unit lets you dial in relative humidity levels to create a healthy, grow-optimized environment with constant monitoring and easy adjustments. This is a wired controller...
Anden dehumidifiers are designed for maximum growth. The model 5790 duct kit is for applications where ducting your dehumidifier is required. A dehumidifier can be installed outside of the grow room and ducted to the room with dedicated inlet and supply ducts. Model 5790 duct...
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an EC-motor...
The HLG 650R Commercial Indoor Horticulture LED grow light is designed to replace a double-ended 1000 watt HID lamp. Each HLG 650R uses 4 of our custom-designed, full-spectrum, high-efficiency, white light, quantum boards with Samsung LM301H and Deep Red LED 660nm diodes. This unit...
320 Pints Per Day, 208-240VAC. Anden A320V1Dehumidifier is designed and built for growth, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth...
HLG Scorpion Diablo is designed for grows with low ceiling heights or for vertical racks. HLG Scorpion Diablo uses 6x QB648 Diablo Quantum Boards® for an even light spread at just 12" from the canopy. This is a very efficient full spectrum horticulture lamp with...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
Our HLG 300L V2 Rspec Commercial Indoor Horticulture LED grow light is designed to replace a single-ended 600watt HID. Each HLG-300L V2 uses 2 of our custom designed full-spectrum high-efficiency white light quantum boards with 544 Top-Bin Samsung LM301B (3500K) and 32 Top-Bin Osram 660nm...
The Electric Sky 300 V3 (ES300 V3) is a flagship, high-power grow light. For only 330 watts, it is blazingly intense. It’ll bring a smile to the face of any home or commercial grower as it beams huge amounts of wideband light energy to plants...
The HLG 650R Commercial Indoor Horticulture LED grow light is designed to replace a double-ended 1000 watt HID lamp. Each HLG 650R uses 4 of our custom-designed, full-spectrum, high-efficiency, white light, quantum boards with Samsung LM301H and Deep Red LED 660nm diodes. This unit...
SolarBar SB800 (Bar8). The most stunningly powerful and flexible SolarSPEC™ horticulture lighting solution to date. The Bar8 is designed specifically for single and multi-tier commercial cultivation with a recommended mounting height over canopy of 6-60″(6-18″ w/no lenses, 24-60″ w/ optional secondary lenses). Precision and innovation have...
The GSI1, Grow Strong’s digital lighting controller, connects with over 500 X2 grow lights across two zones using standard telephone cables. This compact unit can control lights as far as 1,000 feet away with no start-up surge. and simulate sunrise and sunset, gradually warming up...
Welcome to the future of commercial LED grow lights Developed as the perfect solution to vertical racking and overhead grow operations, the X² commercial fully-adjustable spectrum LED grow light from Kind LED was specifically designed for close-proximity growing, capitalizing on valuable tiered growing space while...
610 Watt Full Spectrum LED Grow Light made in the USA. Replaces 1000W Double-Ended Bulbs, and designed specially to be used in greenhouses as well as grow rooms. Nationwide compliant When used as supplemental greenhouse lighting the SK602 LED Grow Light coverage area in flower...
At 1050 actual watts and 1602 μMol/s total photon flux, the patent-pending PhytoMAX-2 1000 LED grow lights are the most powerful LED grow lights for sale worldwide. With PhytoMAX-2 we have delivered the most powerful and reliable, truly full-spectrum (365-750nm, UV to NIR) LED plant...
