TrolMaster Environment Control Accessories for Sale

The TrolMaster DSH-1 Humidity control/device modules allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.   Package Includes  1 x...

The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be...

The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.   Packages Includes 1...

The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the...

3-in-1 Temp/Humid/Light sensor for the Hydro-X system.  Note: This is a replacement or spare part. The main controller comes with a sensor already. Package Includes 1 x 3-in-1 Temp/Humidity/Light Sensor 1 x 16ft RJ12 Cable 1 x RJ12 T-Splitter Specifications Output Voltage 0~11.5V Maximum Current 0.2A Working...

The optional Water Detector WD-2  allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at the floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can...

The Full Spectrum Quantum Sensor (MBS-PAR) provides an accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response...

  The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects...

The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1.   Package Includes 1...

The AMP-2 module connects the Aqua-x to a set of precision pH / EC & temperature probes to constantly measure the pH / EC & temperature of the water being sampled. The AMP-2 works with the TrolMaster PCT-1&2 and the PPH-1&2 probes. Once connected to...

The WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor the floor or space for water… as a leak-detector. The other way the WC-1 can be used is as a water-verification monitor. When used in...

The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.   Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple...

The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC...

The TrolMaster DSH-2 Humidity control/device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.   Package Includes 1...

The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2. Package Includes 1 x...

The HS-1 from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the...

The TS-1 thermostat stations are designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate...

The Aqua-X system is a professional-grade irrigation control system. It is a fully customizable modular designed system. Installation is simple and the system is easy to expand upon. The Aqua-X is designed to control up to 30 separate irrigation zones (24vac solenoid valves or 120vac pumps),  The...

The TrolMaster DSP-1 program device module (timer module) works as a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be...

The OA6-110 control board is designed to control small 110V pump or solenoid valves (less than 1.5 amps). The OA6-110 has 6 separately controlled 120 volt outlets. Each has an LED indicator to show whether the outlet is On or Off.  Up to (5) of...

The OA6-24 control board is designed to control multiple 24vac solenoid valves. It provides an easy and efficient method to control up to 6 valves… each with individual timer settings. Up to 5 OA6-24 can be connected to a single Aqua-x providing a maximum of...

The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the Aqua-x. The PCT-1 probe connects to the Aqua-x via the AMP-2.   Package Include  1 x Reservoir EC/Temp Sensor  Specifications Working Environments Temperature 32-122°F, Humidity=90% Package Dimensions 275mm(L) x 85mm(W) x 95mm(H)

The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the Aqua-x. The PCT-2 probe is a commercially rated probe and it connects to the Aqua-x via the AMP-2. It is intended to...

The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-x. The PPH-1 probe connects to the Aqua-x via the AMP-2.   Package Include  1 x Reservoir pH Sensor  Specifications Working Environments Temperature 32-122°F, Humidity=90% Package Dimensions 275mm(L) x 85mm(W) x 95mm(H)

The TrolMaster pH probes provide accurate and reliable monitoring on the pH of the water being monitored by the Aqua-x. The PPH-2 probe is a commercially rated probe and it connects to the Aqua-x via the AMP-2. It is intended to be used inline with...

The WCS-1 water content sensor allows the user to monitor the % of water/nutrients within the growing medium. The moisture level/water content is displayed in real-time on the WCS module itself, the Aqua-x, and the APP. That data is displayed on a graph (through the...

The additional detector can be added to the WD-1 by using the TSS-1 / T-splitter and water detector (sensor) set. It comes with a T-splitter and an additional water detector in order to have multiple points to detect water by using a single WD-1 module....

The TSS-2 extension cable is simply a 16 ft extension cable to use with the WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or distance between the WD-1 module and the sensor).   Package Includes...

The ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main controller. Package Include  1 x 16ft Extension Cable Specifications Working Environments Temperature 32-122°F, Humidity=90%...

The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to...