The Aqua-X system is a professional-grade irrigation control system. It is a fully customizable modular designed system. Installation is simple and the system is easy to expand upon. The Aqua-X is designed to control up to 30 separate irrigation zones (24vac solenoid valves or 120vac pumps), The...
The Hydro-X system is a professional-grade single-zone environmental controller. It is a fully customizable modular designed system. Installation is simple and the system is easy to expand upon. The Hydro-X system can control most grow lights brands, HVAC systems, mini-split air conditioners, commercial dehumidifiers, and humidifiers, as...
The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules. PACKAGE INCLUDES ...
The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to...
The TrolMaster DSH-1 Humidity control/device modules allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. PACKAGE INCLUDE 1...
The OA6-24 control board is designed to control multiple 24vac solenoid valves. It provides an easy and efficient method to control up to 6 valves… each with individual timer settings. Up to 5 OA6-24 can be connected to a single Aqua-x providing a maximum...
The Full Spectrum Quantum Sensor (MBS-PAR) provides an accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response...
The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1. Package Includes 1...
The AMP-2 module connects the Aqua-x to a set of precision pH / EC & temperature probes to constantly measure the pH / EC & temperature of the water being sampled. The AMP-2 works with the TrolMaster PCT-1&2 and the PPH-1&2 probes. Once connected to...
The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be...
The HS-1 from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the...
The OA6-110 control board is designed to control small 110V pump or solenoid valves (less than 1.5 amps). The OA6-110 has 6 separately controlled 120-volt outlets. Each has an LED indicator to show whether the outlet is On or Off. Up to (5) of the...
The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the Aqua-x. The PCT-1 probe connects to the Aqua-x via the AMP-2.
PACKAGE INCLUDES
1 x Reservoir EC/Temp Sensor
Specifications
Working Environments
Temperature 32-122°F, Humidity=90%
Package Dimensions
275mm(L) x 85mm(W) x 95mm(H)
The WCS-1 water content sensor allows the user to monitor the % of water/nutrients within the growing medium. The moisture level/water content is displayed in real-time on the WCS module itself, the Aqua-x, and the APP. That data is displayed on a graph (through the...
The BETA-4 is capable of controlling any heating or cooling device that is 10-amps or less. Simply plug in your device to the power outlet on the bottom of the BETA-4. It uses 3-buttons a digital display and offers separate "day/night” temperature settings and features...
The ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 moisture content sensor. It has a male and female end and can extend the distance between the WCS-1 module and the sensor probe. PACKAGE INCLUDE 1 x...
The SPH-1 Splitter Hub from TrolMaster makes the installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors,...
The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the...
3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. PACKAGE INCLUDES 1 x 3-in-1 Temp/Humidity/Light Sensor 1 x 16ft RJ12 Cable 1 x RJ12 T-Splitter Specifications Output Voltage 0~11.5V Maximum...
The optional Water Detector WD-2 allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at the floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can...
The WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor the floor or space for water… as a leak-detector. The other way the WC-1 can be used is as a water-verification monitor. When used in...
The Hawkeye from TrolMaster provides an economical and accurate method to monitor an enclosed space. Some users simply need to monitor the temperature, humidity, and CO2 and VPD levels without the need to actually control any devices. The CM-1 / Hawkeye is designed specifically to...
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor, and photocell to create the perfect all-in-one environmental sensor. It is designed for the Hydro-X Pro system only. Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed...
The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC...
The TrolMaster DSH-2 Humidity control/device modules (240V) allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. PACKAGE INCLUDE ...
The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2. PACKAGE INCLUDE ...
The TS-1 thermostat stations are designed to replace a thermostat connected to a conventional cool only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate...
The TrolMaster DSP-1 program device module (timer module) works as a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x. Any device that is 10-amps at 120 volts or less can be...
The TrolMaster EC & Temperature probes provide accurate and reliable monitoring on the EC and temperature of the water being monitored by the Aqua-x. The PCT-2 probe is a commercially rated probe and it connects to the Aqua-x via the AMP-2. It is intended to...
The additional detector can be added to the WD-1 by using the TSS-1 / T-splitter and water detector (sensor) set. It comes with a T-splitter and an additional water detector in order to have multiple points to detect water by using a single WD-1 module....
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an EC-motor...
The HLG 650R Commercial Indoor Horticulture LED grow light is designed to replace a double-ended 1000 watt HID lamp. Each HLG 650R uses 4 of our custom-designed, full-spectrum, high-efficiency, white light, quantum boards with Samsung LM301H and Deep Red LED 660nm diodes. This unit...
320 Pints Per Day, 208-240VAC. Anden A320V1Dehumidifier is designed and built for growth, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help ensure achieve your desired humidity balance for maximum growth...
HLG Scorpion Diablo is designed for grows with low ceiling heights or for vertical racks. HLG Scorpion Diablo uses 6x QB648 Diablo Quantum Boards® for an even light spread at just 12" from the canopy. This is a very efficient full spectrum horticulture lamp with...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the...
Our HLG 300L V2 Rspec Commercial Indoor Horticulture LED grow light is designed to replace a single-ended 600watt HID. Each HLG-300L V2 uses 2 of our custom designed full-spectrum high-efficiency white light quantum boards with 544 Top-Bin Samsung LM301B (3500K) and 32 Top-Bin Osram 660nm...
The Electric Sky 300 V3 (ES300 V3) is a flagship, high-power grow light. For only 330 watts, it is blazingly intense. It’ll bring a smile to the face of any home or commercial grower as it beams huge amounts of wideband light energy to plants...
The HLG 650R Commercial Indoor Horticulture LED grow light is designed to replace a double-ended 1000 watt HID lamp. Each HLG 650R uses 4 of our custom-designed, full-spectrum, high-efficiency, white light, quantum boards with Samsung LM301H and Deep Red LED 660nm diodes. This unit...
SolarBar SB800 (Bar8). The most stunningly powerful and flexible SolarSPEC™ horticulture lighting solution to date. The Bar8 is designed specifically for single and multi-tier commercial cultivation with a recommended mounting height over canopy of 6-60″(6-18″ w/no lenses, 24-60″ w/ optional secondary lenses). Precision and innovation have...
The GSI1, Grow Strong’s digital lighting controller, connects with over 500 X2 grow lights across two zones using standard telephone cables. This compact unit can control lights as far as 1,000 feet away with no start-up surge. and simulate sunrise and sunset, gradually warming up...
Welcome to the future of commercial LED grow lights Developed as the perfect solution to vertical racking and overhead grow operations, the X² commercial fully-adjustable spectrum LED grow light from Kind LED was specifically designed for close-proximity growing, capitalizing on valuable tiered growing space while...
610 Watt Full Spectrum LED Grow Light made in the USA. Replaces 1000W Double-Ended Bulbs, and designed specially to be used in greenhouses as well as grow rooms. Nationwide compliant When used as supplemental greenhouse lighting the SK602 LED Grow Light coverage area in flower...
At 1050 actual watts and 1602 μMol/s total photon flux, the patent-pending PhytoMAX-2 1000 LED grow lights are the most powerful LED grow lights for sale worldwide. With PhytoMAX-2 we have delivered the most powerful and reliable, truly full-spectrum (365-750nm, UV to NIR) LED plant...
